uPVC casement windows open on a pair of friction hinges, one at the top of the sash and one at the bottom. They do two jobs: they carry the weight of the glass, and they hold the window open at whatever angle you leave it. After ten or fifteen years the pivots wear, the stay arm loses its friction and the sash starts to drop on the handle side.
The signs
- The window has to be lifted to close it, or it catches on the frame at the bottom.
- The handle will turn but the window will not lock, because the locking points no longer line up with the keeps.
- The window will not stay open, or slams shut in a breeze.
- A visible gap at the top or hinge side when it is closed, with a draught to match.
The repair
Friction hinges are a standard part. We measure the hinge length and the stack height (the gap between sash and frame), fit a matching pair, and then re-set the sash so it closes squarely and compresses the seals evenly. If the window is on an upper floor and is a means of escape, we fit egress hinges that open fully and have a fire-escape release.
We always replace hinges in pairs. One new hinge working against one worn one puts the sash out of true again within months.
While we are there
Dropped sashes often go hand in hand with worn gaskets and stiff locking gear, so we check both. A new set of gaskets and a drop of lubricant on the espagnolette usually costs very little extra on the same visit and saves a second call-out.
Is it worth repairing?
Yes, in almost every case. A uPVC frame has decades of life in it. New hinges, a new handle if needed and fresh seals bring the window back to as-new operation for a small fraction of the cost of replacement. Tell us about the window and we will quote for the repair.