A double-glazed window is two panes of glass sealed around a spacer bar, with dry air or gas trapped between them. That sealed gap is what keeps the heat in. When you see mist, droplets or a milky haze that you cannot wipe away from either side, the seal has let go and damp air is getting into the gap.
Why seals fail
Most sealed units last fifteen to twenty-five years. The seal is a flexible compound and it ages: sunlight, heat and cold make it expand and contract thousands of times, and eventually a gap opens. A few things bring that day forward.
- Drainage holes in the frame that have blocked, so the bottom edge of the unit sits in water.
- Units that were fitted without packers, so the glass rests on the frame instead of being supported at the corners.
- Direct sun on a south-facing elevation, which simply works the seal harder.
- Cleaning with a pressure washer or solvent-based products that attack the edge seal.
What a repair involves
The frame is almost never the problem. The practical fix is to replace the sealed unit itself: the glazing beads come out, the old unit is lifted, the opening is measured, and a new unit with the same thickness, spacer and glass type is ordered. On the return visit it is fitted on fresh packers and the beads go back on. The window looks exactly as it did before, minus the mist.
A new unit is usually a fraction of the cost of a new window, and there is no making good to the plaster or the outside wall.
When replacement makes sense
If the frame is cracked, the hinges and locks are failing too, or the window is a single-glazed timber unit that was never double glazed, then it is worth comparing the cost of a repair against a new window. We will say so when that is the case. Most of the time, though, misting is a glass problem, and glass is replaceable.
What to send us
A photograph of the whole window and a close-up of the misting are enough for a quotation. If you can, tell us whether the window is uPVC, aluminium or timber, and which floor it is on. Request a quote and we will come back to you with the options.